LITIO (ducting and developments for BricsCAD

LITIO is an add-on for BricsCAD, that calculates and draws the unfolded sheet metal developments of ducts, rectangle-to-round transitions, cylinders, cones, pipe intersections, connections, bifurcations, elbows, etc. It is ideal for the sheet metal-processing industry: for HVAC, hoppers, cyclones, dust extraction, ducts, conveying systems, silos, piping, etc.

  • More than 30 different patterns
  • Developments calculated according to German standard DIN 6935
  • Input in, out or middle (neutral fiber) dimensions
  • It draws a 3D representation and the 2D development (contour and/or mesh)
  • It works within BricsCAD v.11 and higher (either Classic, Pro and/or Platinum)

Description

LITIO is a ducting sheet metal program that calculates flat (unfolded) sheet development of ducts, rectangle to round transitions, cylinders, cones, pipe intersections, connections, bifurcations, elbows, etc. For HVAC, hoppers, cyclones, dust extraction, ducts, conveying systems, silos, piping, etc. To draw your sheet metal developments directly in BricsCAD, AutoCAD R2000 and later or GStarCAD (no need of DXF convertions). Steps of use: First select the 3D surface you want to unfold. (You can select: either inside, outside, or mid cross sectional dimensions and/or height specifications; to draw or not the 3D surface, and the unfolded sheet as a mesh [to help you when bending the sheet] or as 2D contour [to ease cutting]; the precision of the calculation of the developments). Metric Units/Imperial units: the program automatically sets the units according to the units used in the current drawing session. After finishing the input of parameters, the program draws the 3D object and the respective development. Afterwards, you can use the 2D developments for NC CAM cutting (plasma, laser, etc.) or manual cutting, by plotting them 1 to 1 (1 d.u. = 1 mm or 1 d.u. = 1 inch) to get paper templates, and using them to mark the metal sheet and cut.

Documentation

81400-manual.pdf

I agree to the extended privacy statement

Download

Language
Requirements
LITIO (ducting and developments for BricsCAD LITIO 1.3 for BricsCAD
BricsCAD Classic V11 - V18
Works on Linux, Mac &
Windows
Released
April 11, 2018
Publisher

Litio


ARGENTINA
www.litio.si

Contact